3. Copy
This chapter describes frequently used copier functions and operations. For information not included in
this chapter, see Copy/ Document Server available on our website.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
For details about placing the original on the exposure glass, see page 57 "Placing Originals on the
Exposure Glass".
For details about placing the original in the ADF, see page 57 "Placing Originals in the Auto Document
Feeder".
To copy onto paper other than plain paper, specify the paper type in User Tools according to the weight
of the paper you are using. For details, see "Tray Paper Settings", Connecting the Machine/ System
Settings.
The following procedure explains copying onto paper whose size and orientation matches that of the
originals exactly.
1. Display the initial copy screen.
• When using the standard operation panel
Press the [Home] key on the bottom left of the control panel, and press the [Copier] icon on
the [Home] screen.
• When using the Smart Operation Panel
Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [Copier] icon on the Home screen 4.
2. Make sure that no previous settings remain.
When there are previous settings remaining, press the [Reset] key.
59
To Next Page
Loading...
Need help?
General
