34
English
User Settings
On-screen Display Menus
The Projector has multilingual On-screen Display menus that
allow you to make image adjustments and change a variety of
settings.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or
Projector Keypad.
2 When OSD is displayed, use the
keys to select any item
in the main menu. While making a selection on a particular page,
press the
or “Enter” key to enter sub menu.
3. Use the
keys to select the desired item and adjust the
settings using the
key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Enter” to conrm, and the screen will return to the main
menu.
6. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
Main Menu
SettingsSub Menu
To Next Page
Loading...
Need help?
General
