Menu Items and Functions
All items in Adjustment Settings for Operators appear regardless of which of the machine's optional
components are installed. If you change the settings of options that are not installed, the changes will
have no effect.
Machine Image Quality
For details about the following items, see "Machine: Image Quality", Paper Settings .
No. Item Description
0209 Photoconductor Special
Mode
Increase the amount of lubricant applied to the
photoconductor.
0210 Fusing Belt Smoothing Remove vertical and horizontal lines from printouts.
0211 Fusing Ability by Paper
Feed Speed
Increase fusing performance.
Machine: Paper Feed/ Output
For details about the following items, see "Machine Paper Feed/ Output", Paper Settings .
No. Item Description
0106 Criteria for Paper Weight The machine may fail to correctly detect the weight of the
paper loaded in the paper tray. If this happens, adjust
the machine so the printing conditions are suitable by
inputting a numerical value (um) for the thickness of the
paper.
Machine: Maintenance
For details about the following items, see "Machine Maintenance", Paper Settings .
No. Item Description
0701 Temperature / Humidity
inside the Machine
Display the internal temperature and humidity.
0702 Temperature / Humidity
outside the Machine
Display the external temperature and humidity.
Finishing: Finisher
For details about the following items, see "Finishing: Finisher", Paper Settings .
Menu Items and Functions
151
To Next Page
Loading...
Need help?
General
