1. Getting Started
This section describes how to start using this machine.
Guide to Components
This section introduces the names and functions of the components.
• Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If
the machine overheats, a fault might occur.
1. Suspend/Resume switch
Press to momentarily stop printing. Pressing again resumes the stopped operation.
2. Attention light
Notifies you of errors during printing, such as paper jam and out of paper.
3. Toner cover
Open to change the toner container.
4. Front cover (front right /left cover)
Open to access the inside of the machine.
5. Control panel
See “Control Panel”.
35
To Next Page
Loading...
Need help?
General
