Daily Maintenance
This section describes how to shake the white ink cartridge and clean the media guide. Perform
maintenance before daily work so the machine may be used safely for an extended period.
Shaking a White Ink Cartridge
As the components of white ink deposit easily, pull out the white ink cartridge, and then shake it before
daily work.
Shake the white ink cartridge when the following message appears on the display:
"White ink has settled. Please shake the white ink cartridge."
• Do not touch or stain the contacts of the ink cartridges, flushing cartridges, displacement liquid
cartridges, and cleaning cartridge, as doing so may cause damage to the print circuit board.
• If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes immediately
with running water. Consult a doctor if necessary.
• If ink, flushing liquid, or displacement liquid are ingested, consult a doctor immediately with
Safety Data Sheet (SDS).
• Please use protective equipment in order to avoid exposure to liquid.
• When performing maintenance on the machine, make sure to wear the attached gloves.
• When removing jammed media or performing maintenance on the machine, avoid getting ink,
flushing liquid, and displacement liquid on your clothing. If ink, flushing liquid, and displacement
liquid come into contact with your clothing, wash the stained area with water.
• When removing jammed media, replacing media, or performing maintenance on the machine,
avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink, flushing liquid, and
displacement liquid come into contact with your skin, wash the affected area thoroughly with
soap and water.
• The supplied gloves are consumables. If they are damaged or lost, use polythene gloves
instead.
2. Daily Care and Maintenance
10
To Next Page
Loading...
Need help?
General
