Maintenance When Needed
This section describes how to deal with ink affixed to the nozzle surfaces of the print heads, and how to
clean the exterior, pre-heater, platen, pinch rollers, media guides, and media sensors.
Perform maintenance when needed to ensure the safe and long-term use for the machine.
• When cleaning the ink-station or the heads, or replacing the cleaning cartridge, make sure to
wear the attached goggles.
• When performing maintenance on the machine, make sure to wear the attached gloves.
• If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes immediately
with running water. Consult a doctor if necessary.
• If ink, flushing liquid, or displacement liquid are ingested, consult a doctor immediately with
Safety Data Sheet (SDS).
• When removing jammed media or performing maintenance on the machine, avoid getting ink,
flushing liquid, and displacement liquid on your clothing. If ink, flushing liquid, and displacement
liquid come into contact with your clothing, wash the stained area with water.
• When removing jammed media, replacing media, or performing maintenance on the machine,
avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink, flushing liquid, and
displacement liquid come into contact with your skin, wash the affected area thoroughly with
soap and water.
• The supplied gloves are consumables. If they are damaged or lost, use polythene gloves
instead.
• The optimal frequency of maintenance varies depending on the period of service or the operating
environment of the machine. In addition, maintenance may be frequently required depending on
the types of media to be used or images to be printed. Make any necessary changes to the
maintenance frequency according to the operating conditions of the machine.
Cleaning the Exterior
Depending on the operating environment, particles, or dust may adhere to the exterior of the machine.
Clean the exterior if they are dirty.
2. Daily Care and Maintenance
26
To Next Page
Loading...
Need help?
General
