Ricoh Pro L5160 Rip Settings Guide

Restrictions on Job Editor
Overview Details Solution
Cannot print 1,000 copies or
more when printing files other
than PDF.
Even if you select the [Print] tab
on Job Editor "Print Options"
"Copies" and select 1,000 or
more copies, it changes to "999"
in RIP-Queue.
Specify the number of copies
within 999.
To print 1,000 or more copies,
print the PDF file.
It is possible to enter a value
exceeding the maximum limit
of copies.
If you open the file and click the
[Print] tab "Print Options"
"Copies" and click the button,
you can specify "10,000",
exceeding the maximum limit of
9,999.
If actuality, instead of "10,000",
the value is saved as "9,999".
The "Apply the settings from
the most recently submitted
job to the new job" function is
not applied.
Even if you check "Apply the
settings from the most recently
submitted job to the new job" in
the [Open] menu, it may not be
applied.
Change the print job setting
manually.
When using the "Apply the
settings from the most recently
submitted job to the new job"
function, an incorrect value is
applied.
If you check "Apply the settings
from the most recently submitted
job to the new job" in the [Open]
menu and open the file, the
following problems may occur.
- "Media Group" is blank and
cannot be specified.
- "(Invalid)" appears after the
media name and the selectable
values are odd.
- The print mode appears with
"<>" and there is only one
selectable choice.
Do not send the affected print
job to RIP-Queue and restart Job
Editor.
3. Restrictions on Using RIPCenter/PosterShop
34

Ricoh Pro L5160 Specifications

General

Brand	Ricoh
Model	Pro L5160
Category	Printer
Language	English