1. Installing RIPCenter/PosterShop
This section explains how to install RIPCenter and, optionally, PosterShop on the computer. The
installation procedure is the same in both cases.
Checking the Operating Environment
To use RIPCenter/PosterShop, the following environment is required:
Configuration
Desktop computer
Operating system
• Windows 7 Professional (64-bit)
• Windows 8.1 Pro (64-bit)
• Windows 10 Pro (64-bit)
32-bit operating systems are not supported.
CPU
Intel Core i7/i9
AMD FX and later models
Memory
16 GB or greater
Available hard disk space
750 GB or greater
• The available hard disk space mentioned above is required for storing temporary data when
printing. The required space (reference value) for basic printing is as follows.
• For printing with a print width of 1615 mm, image length of 50 m, color composition of
4C, resolution of 1200 dpi × 1200 dpi, and a single color layer (color): approx. 179
GB
• For printing with a print width of 1615 mm, image length of 50 m, color composition of
4CW, resolution of 900 dpi × 600 dpi, and three color layers (color/white/color):
approx. 153 GB
• The greater the image length, the greater the temporary data size becomes.
• The temporary data is deleted after printing or when printing is cancelled or has failed.
Hard disk rotational speed
7200rpm
USB ports
2 or more
5
To Next Page
Loading...
Need help?
General