Ricoh Ri 1000 User Manual

RICOH Ri 1000
User Manual
103
How to Clean the Maintenance Unit and the Flushing box
Cleaning part: The Maintenance Unit and the Flushing box
Timing of Cleaning: Cleaning once a week
Cleaning content: Clean the parts described below with wiping the Cleaning Applicator
impregnated with Cleaning Liquid. Wipe gently and politely.
Replace the Cleaning Applicator if it gets dirty.
Although it depends on the degree of contamination,
it is a standard to use about 5 to 10 in a series of cleaning work.
CAUTION
DO NOT rub too strongly. DO NOT wipe other than the areas indicated.
there is a possibility that parts may be damaged, deformed or
detached.
If parts breakage, deformation, or detachment occurs, it may cause
a machine failure.
Cleaning time: About 10 minutes
Things to prepare: Gloves (commercial product, one that does not pass ink) / To wear
Protective glasses or goggles (commercially available) / To wear
Cleaning Applicator dedicated to Ri 1000
Cleaning Liquid dedicated to Ri 1000

Ricoh Ri 1000 Specifications

General

Print Technology	Inkjet
Print Resolution	1200 x 1200 dpi
Power Requirements	AC 100-240V, 50/60Hz
Memory	2 GB
Ink Type	Pigment Ink
Ink Colors	CMYK
Connectivity	USB
Operating System Support	Windows
Supported Media Types	Cotton, Polyester