Ricoh Ri 1000 User Manual

RICOH Ri 1000
User Manual
130
9 Updating Firmware & Obtaining Print Logs
WARNING: Do not perform a firmware update unless the printer is in Ready Status
9.1 Updating Firmware
1. Download the application from www.anajet.com/downloads
2. Open the Printer Manager Application
3. Enter the printer IP address needing to be updated
4. Select the version to use for the update
5. Click the F/W Update button then select START UPDATE to send the firmware update
*Note: always update the Interface Board first prior to any firmware updates*

Ricoh Ri 1000 Specifications

General

Print Technology	Inkjet
Print Resolution	1200 x 1200 dpi
Power Requirements	AC 100-240V, 50/60Hz
Memory	2 GB
Ink Type	Pigment Ink
Ink Colors	CMYK
Connectivity	USB
Operating System Support	Windows
Supported Media Types	Cotton, Polyester