Ricoh Ri 1000 User Manual

RICOH Ri 1000
User Manual
98
7.3 Adjusting the print position
• The printing start position can be adjusted accurately within the range of ±4mm. Use this if appears
that the print is not centered.
• The button is for adjusting the printing position.
• After printing the pattern for the print position adjustment, you have to find appropriate value.
Position the paper so that the cross on the test print paper comes at the right bottom corner.
⚫ Values can be selected between “-4.0” ~ “+4.0” in increments of 0.1mm.
⚫ To move the print position to the “A” direction, input a value between “-1” and “-4” in the Tabl
e input area
⚫ To move the print position to the “B” direction input a value between “+1” and “+4”. In the hea
d input area

Ricoh Ri 1000 Specifications

General

Print Technology	Inkjet
Print Resolution	1200 x 1200 dpi
Power Requirements	AC 100-240V, 50/60Hz
Memory	2 GB
Ink Type	Pigment Ink
Ink Colors	CMYK
Connectivity	USB
Operating System Support	Windows
Supported Media Types	Cotton, Polyester