Ricoh Ri 1000 User Manual

RICOH Ri 1000
User Manual
25
1.6 Configuring your printer via AnaRIP
Prior to setting up your printer, you will need to download the latest version of AnaRIP software for
your printer. You can find this software at www.AnaJet.com/downloads . Locate the latest version of
AnaRIP for your specific printer. You will then be routed to a page with download and installation
instructions.
Printer Software Program Requirements
Once the ink cartridges are installed and ink flow has been established, it’s time to install the
AnaRIP software onto the PC. Your PC must have Microsoft Windows Vista, Windows 7, Windows 8, or
Windows 10 operating system, or on a MAC, some kind of Windows emulation must be running such as
Parallels or Boot Camp. The computer also needs to have an ETHERNET port
When the software is installed double click the AnaRIP icon to launch the software and then connect the
printer to the computer using the provided ETHERNET cable.

Ricoh Ri 1000 Specifications

General

Print Technology	Inkjet
Print Resolution	1200 x 1200 dpi
Power Requirements	AC 100-240V, 50/60Hz
Memory	2 GB
Ink Type	Pigment Ink
Ink Colors	CMYK
Connectivity	USB
Operating System Support	Windows
Supported Media Types	Cotton, Polyester