Alert Messages (Displayed on the Control Panel)
Message Cause Solution
"Add Toner" The toner has run out. Replace the
print cartridge.
For details, see "Replacing the
Print Cartridge", Operating
Instructions.
"Change (Tray name) to the
following settings:"
The size of the paper in the tray
does not match the paper size
specified in the printer driver.
Select a tray containing paper
that is the same size as the
specified paper size.
"Do you want to continue
printing by changing an
included Adobe font?"
The print data contains data that
cannot be printed.
• Press [continue] to execute
printing. Alternatively, press
[Job Reset] to cancel
printing.
"Ethernet Board Error" An error has occurred in the
Ethernet interface.
Turn the main power switch off
and then back on again. If the
message appears again, contact
your service representative.
"Load paper in" (Tray
name).
The printer driver settings are
incorrect or the tray does not
contain paper of the size selected
in the printer driver.
Check that the printer driver
settings are correct, and then load
paper of the size selected in the
printer driver into the input tray.
For details about how to change
the paper size, see page 25
"Loading Paper".
When Messages Are Displayed
71