Chapter 2 Vertical System Setting RIGOL
MSO4000/DS4000 User’s Guide 2-1
Chapter 2 Vertical System Setting
MSO4000/DS4000 provides four analog input channels (CH1 to CH4) and provides
independent vertical control system for each channel. As the vertical system setting
methods of the four channels are completely the same, this chapter takes CH1 as an
example to illustrate the setting method of the vertical system.
The contents of this chapter:
To Turn the Analog Channel On/Off
To Adjust the Vertical Scale
To Adjust the Vertical Position
To Specify the Channel Coupling
To Specify the Bandwidth Limit
To Set the Probe
To Specify the Input Impedance
To Turn Waveform Invert On/Off
To Specify the Vertical Reference
To Specify the Amplitude Unit
To Set the Channel Label
To Set the Delay Calibration
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30
To Next Page
Loading...
Need help?
General
