Rigol DS8000-R Series User Manual

Chapter 19 System Utility Function Setting RIGOL
DS8000-R User Guide 19-13
Click Ink Saver continuously to enable or disable the ink saver setting. If
disabled, you need to set Color. Click Color continuously to select "Gray"
or "Color".
Email
This oscilloscope supports sending files via emails. Click Utility → More → Email to
enter the email setting menu.
1. Set the Email Server
Click Settings to enter the email server login setting menu. The following
window is displayed. After the setting, click OK to complete the server login. To
cancel login, click Cancel to exit or click on the icon at the upper-right
corner of the window to exit. If you exit the server setting window, you can click
SMTP, Port, UserName, or PassWord to reopen the window.
⚫ Set SMTP
Click SMTP to set the mail transmission protocol. For detailed settings of
mail transmission protocol, refer to descriptions in "To Create a Folder".
⚫ Set the port
Click Port to set the protocol port in the pop-up numeric keypad. Its range
is from 1 to 65535.
⚫ Set the user name
Click UserName to set the user name of the server. For detailed setting
methods for the user name, refer to descriptions in "To Create a Folder".
⚫ Set the password
Click PassWord to set the password of the server. For detailed setting
methods for the password, refer to descriptions in "To Create a Folder".
⚫ Email test
Click Test to test whether the e-mail server is properly set.
⚫ Restore default settings

Rigol DS8000-R Series Specifications

General

Brand	Rigol
Model	DS8000-R Series
Category	Test Equipment
Language	English