Rigol MSO7000 Series User Programming Manual

Chapter 2 Command System RIGOL
MSO7000/DS7000 Programming Guide 2-71
:HISTogram Commands
Command List:
 :HISTogram:DISPlay
 :HISTogram:TYPE
 :HISTogram:SOURce
 :HISTogram:SIZE
 :HISTogram:STATic
 :HISTogram:RESet
 :HISTogram:BLIMit
 :HISTogram:LLIMit
 :HISTogram:RLIMit
 :HISTogram:TLIMit
:HISTogram:DISPlay
Syntax
:HISTogram:DISPlay <bool>
:HISTogram:DISPlay?
Description
Enables or disables the histogram function; or queries the status of the
histogram.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{1|ON}|{0|OFF}}
0|OFF
Return
Format
The query returns 1 or 0.
Example
:HISTogram:DISPlay ON /*Enables the histogram.*/
:HISTogram:DISPlay? /*The query returns 1.*/
:HISTogram:TYPE
Syntax
:HISTogram:TYPE <type>
:HISTogram:TYPE?
Description
Sets or queries the type of the histogram.
Parameter
Name
Type
Range
Default
<type>
Discrete
{HORizontal|VERTical|MEAS}
HORizontal
Return
Format
The query returns HOR, VERT, or MEAS.
Example
:HISTogram:TYPE VERTical /*Sets the type of the histogram to
VERTical.*/
:HISTogram:TYPE? /*The query returns VERT.*/

Rigol MSO7000 Series Specifications

General

Memory Depth	Up to 500 Mpts
Operating Temperature	0 °C to +50 °C
Channels	4 analog + 16 digital
Display	10.1 inch capacitive touchscreen
Waveform Capture Rate	Up to 600, 000 wfms/s
Vertical Resolution	8 bits
Maximum Input Voltage	400 V (DC + AC peak)
Trigger Types	Edge, Pulse, Slope, Video, Pattern, Duration, Timeout, Window, Runt, Setup/Hold, Delay, Nth Edge
Protocol Decoding	RS232/UART, I2C, SPI, CAN, LIN, FlexRay, I2S, MIL-STD-1553, ARINC429
Interfaces	USB, LAN, HDMI