General ueing guidelines ....................................4
Flueing options .....................................................6
Air hose connection ..............................................9
Flue components ..................................................10
Flue component connections................................11
Side direct ue assembly......................................12
Side extended ue assembly................................13
Up and back ue assembly ..................................14
Down and out ue assembly ................................15
Cutting the ASPDFK and ESPIPE900 to length ...16
Steps to create a wall terminal .............................17
Appendices
Appendix 1: ESBEND 90° ....................................19
Appendix 2: ESBEND 45° ....................................20
Contents
Every gas re requires a ue system that will draw eectively and clear ue products safely
under all wind and climatic conditions. It is up to the installer to ensure the appliance is provided
with an eective ue.
Installer responsibility