21
Before You Start Playing
Turning On the Lights
After turning on the power, turn on the [Illumination] switch
(located underneath the left-hand side of the keyboard).
fig. 00-33
The panel illumination of the instrument will light.
Cautions When Using Illumination
fig.00-31
When the illumination is used for an extended period, the
light bulbs and the metal parts near the light bulb (see
diagram below) will become hot. Be careful not to touch
these areas. In particular, be careful of the following
locations.
1.
Panel illumination light bulb
Do not touch the light bulb or nearby parts. When
closing the lid, be sure to hold the handles.
2.
Metal fittings of the cover
After closing the lid, do not touch this area.
3.
Music stand
Do not touch the light bulb cover.
4.
Light bulb cover for foot area (below keyboard)
The entire cover will become hot. Be careful not to touch
your leg to this area.
The bulbs used for illumination can be replaced. For details
on replacing a bulb, refer to
“Replacing the Illumination
Bulbs”
(p. 242).
fig.00-34
Illumination
On
1
3
4
2
Illumination Switch
AT-90SL_e.book 21 ページ ２００４年９月８日 水曜日 午後５時４４分
To Next Page
Loading...
Need help?
General
