Roland RD-800 Guide

19
Modulation FX Parameters
31: DELAY
This is a stereo delay.
When Feedback Mode is NORMAL:
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
When Feedback Mode is CROSS:
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
FEEDBACK,
BALANCE
Species the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Rate Knob
Species the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Delay Left
(sync switch)
OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Delay Left
(msec)/
Delay Left (note)
1–1300 [msec]
Delay time from the original sound
until the left delay sound is heard
note (p. 31)
Delay Right
(sync switch)
OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Delay Right
(msec)/
Delay Right
(note)
1–1300 [msec]
Delay time from the original sound
until the right delay sound is heard
note (p. 31)
Phase Left
NORMAL,
INVERSE
Phase of the delay sound
Phase Right
Feedback Mode NORMAL, CROSS
Selects the way in which delay sound
is fed back into the eect. (See the
gures above.)
Feedback # -98–+98 [%]
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative “-” settings invert the phase.
HF Damp
200–8000 [Hz],
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out (BYPASS: no cut).
Low Gain -15–+15 [dB] Gain of the low frequency range
High Gain -15–+15 [dB] Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
32: MODULATION DELAY
Adds modulation to the delayed sound.
When Feedback Mode is NORMAL:
R in R out
L in L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
When Feedback Mode is CROSS:
R in
R out
L in
L out
Feedback
Feedback
Balance W
Balance D
Balance W
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
FEEDBACK,
RATE,
BALANCE
Species the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Rate Knob
Species the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Delay Left
(sync switch)
OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Delay Left
(msec)/
Delay Left (note)
1–1300 [msec]
Delay time from the original sound
until the left delay sound is heard
note (p. 31)
Delay Right
(sync switch)
OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Delay Right
(msec)/
Delay Right
(note)
1–1300 [msec]
Delay time from the original sound
until the right delay sound is heard
note (p. 31)
Feedback Mode NORMAL, CROSS
Selects the way in which delay sound
is fed back into the eect (See the
gures above.)
Feedback # -98–+98 [%]
Adjusts the amount of the delay
sound that’s fed back into the eect.
Negative “-” settings invert the phase.
HF Damp
200–8000 [Hz],
BYPASS
Adjusts the frequency above which
sound fed back to the eect is ltered
out (BYPASS: no cut).
Rate # OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Rate (Hz) #/
Rate (note) #
0.05–10.00 [Hz]
Frequency of modulation
note (p. 31)
Depth 0–127 Depth of modulation
Phase 0–180 [deg] Spatial spread of the sound
Low Gain -15–+15 [dB] Gain of the low frequency range
High Gain -15–+15 [dB] Gain of the high frequency range
Balance #
D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level

Roland RD-800 Specifications

General

Brand	Roland
Model	RD-800
Category	Synthesizer
Language	English