EasyManuals Logo
Home>Roland>Synthesizer>RD-800

Roland RD-800 Guide

Roland RD-800
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
Modulation FX Parameters
4: STEP FILTER
This is a lter whose cuto frequency can be modulated in steps. You
can specify the pattern by which the cuto frequency will change.
You can use MFX CONTROL to restart the step sequence from the
beginning (p. 31).
L in
R in
L out
R out
Step Filter
Step Filter
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
RATE,
ATTACK,
FILTER
RESONANCE
Species the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Rate Knob
Species the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Step 01 –16 0–127 Cuto frequency at each step
Rate (sync sw) OFF, ON
If this is ON, the modulation is
synchronized to the tempo of the
rhythm (owner’s manual p. 24).
Rate (Hz) #/
Rate (note) #
0.05–10.00
Rate of modulation
note (p. 31)
Attack # 0–127
Speed at which the cuto frequency
changes between steps
Filter Type
LPF,
BPF,
HPF,
NOTCH
Filter type
Frequency range that will pass
through each lter
LPF: frequencies below the cuto
BPF: frequencies in the region of the
cuto
HPF: frequencies above the cuto
NOTCH: frequencies other than the
region of the cuto
Filter Slope -12, -24, -36 [dB]
Amount of attenuation per octave
-12 dB: gentle
-24 dB: steep
-36 dB: extremely steep
Filter Resonance
#
0–127
Filter resonance level
Increasing this value will emphasize
the region near the cuto frequency.
Filter Gain 0–+12 [dB] Amount of boost for the lter output
Level 0–127 Output level
5: ENHANCER
Controls the overtone structure of the high frequencies, adding
sparkle and tightness to the sound.
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
2-Band
EQ
2-Band
EQ
Parameter Value Explanation
Switch OFF, ON Turns the eect on/o.
Depth Knob
SENS,
MIX
Species the parameter that is
controlled by the MODULATION FX
[DEPTH] knob.
Rate Knob
Species the parameter that is
controlled by the MODULATION FX
[RATE] knob.
Sens # 0–127 Sensitivity of the enhancer
Mix # 0–127
Level of the overtones generated by
the enhancer
Low Gain -15–+15 [dB] Gain of the low range
High Gain -15–+15 [dB] Gain of the high range
Level 0–127 Output Level

Other manuals for Roland RD-800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roland RD-800 and is the answer not in the manual?

Roland RD-800 Specifications

General IconGeneral
BrandRoland
ModelRD-800
CategorySynthesizer
LanguageEnglish

Related product manuals