Intro / Fill-In
Operations
Playing a rhythm pattern$
Playing patterns consecutively
Adjusting the Tempo
You can add an intro before the basic
rhythm plays, or insert a fill-in while
the basic rhythm plays.
Adding an intro$
Inserting a fill-In
4. Press the [START/STOP] button.
The STEP NO indicators light
successively from left to right.
5. Use the [LEVEL] knob of each
instrument to adjust the volume
balance, and use the rear panel
[VOLUME] knob to adjust the overall
volume.
When selecting a pattern, you can
select multiple patterns by pressing
two buttons at the same time. The
patterns you’ve selected will play
consecutively. The currently-playing
pattern blinks.
$
6. Use the [TEMPO] dial or the [FINE]
knob to adjust the playback speed
(40.00–300.00 BPM).
7. To stop, press the [START/STOP]
button once again.
1. Press an INTRO/FILL IN [1]–[4]
button to select an intro rhythm.
2. Set the [I/F-VARIATION] switch.
3. Press the [TAP] button.$
The indicator of the selected intro
blinks.$
To cancel the intro, press the [TAP]
button once again.
4. Press the [START/STOP] button.$
The intro plays for one measure, and
then the basic rhythm plays.
Manually
1. Set the measure selector to
“MANUAL.”
2. Press the [START/STOP] button.
3. Press an INTRO/FILL IN [1]–[4]
button to select a fill-in rhythm.
4. Set the [I/F-VARIATION] switch.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
