Roland TR-08 User Manual

Copying a Pattern
*
Continue holding down the [TAP]
button during the copy operation.
The operation is cancelled if you
release the [TAP] button.
Copying a Pattern Between A-B$
OUT] buttons, and use [2]–[12] to
select the instrument that you want to
solo. $
1. Set the mode switch to either
“1stPart” or “2ndPart.”$
2. With the copy-destination pattern
selected, hold down the [TAP] button.$
3. (Continuing to hold down the [TAP]
button) Press a [1]--[16] button to
select the copy-source pattern.
4. (Continuing to hold down the [TAP]
button) Press the [START/STOP]
button to execute the copy.
1. Set the mode switch to either
“1stPart” or “2ndPart.”
2. With the pattern that you want to
copy selected, hold down the [TAP]
button.$
3. (Continuing to hold down the [TAP]
button) Use the [VALUE] knob to make
the display indicate “A-b” or
“b-A.”$
4. (Continuing to hold down the [TAP]
button) Press the [START/STOP]
button to execute the copy.
20

Roland TR-08 Specifications

General

Sound effects	Compression
Sound effects quantity	1
Number of steps per chain	16
MIDI in	Yes
USB connector type	Micro-USB B
Power source type	USB, Battery
Housing color	Black

Weight and Dimensions

Depth	130 mm
Width	308 mm
Height	51 mm
Weight	1300 g