172
❚
Checking the contents of disk –
9 Info (Disk information)
This function displays the number of files on the disk, the
free area of the disk, and the size of each file.
Song File
Displays the number of songs on the disk (MRC Pro songs
and Standard MIDI Files).
Sound File (Data file)
Displays the number of data files on the disk.
Chain File
Displays the number of chain files on the disk.
Groove File (User groove template file)
Displays the number of user template files on the disk.
Total
Displays the total number of all files on the disk.
✳ The Total does not indicate the total number of Song
Files through Groove Files, above.To save the song to
disk with the XP-80, the information regarding that
song will be stored in the “SONGLIST.SV” file. The
Total includes this file too, but this file cannot be
checked from the XP-80.
Disk Capacity
The available memory of the disk will be shown to the left of
Disk Capacity and the total disk capacity to the right.
<Procedure>
❶ Make sure that the Disk Menu display (DISK) is up.
❷ Press [F6] (Menu) to select Menu 3, then [F1] (Info) to
call up the Disk Information display (DISK/Info).
This display can also be called up by moving the cur-
sor to “9 Info” and pressing [ENTER] on the Disk
Menu display (DISK), or pressing the numeric key [9]
then [ENTER].
❸ To check the size of each file, press [F5] (List) to open
the File List window.
To change the file on display, press [F2] (Song) or [F3] (File).
To check an MRC Pro song or Standard MIDI file, press [F2]
(Song). When checking other file types, press [F3] (File).
Chapter 9. Disk-related functions (Disk mode)
[DISK]➞[9]➞[ENTER]
To Next Page
Loading...
Need help?
General
