Ruijie Reyee RG-ES1 Series User Manual

Hardware Installation and Reference Guide Product Overview
4
LED
Panel Identification
State
Meaning
System status LED
PWR
Off
The switch is powered off.
Solid green
The switch is operational.
RJ45 port status LED
Upper left corner of the
port
Off
The port is not connected.
Solid green
The port is connected at a rate of 10/100 Mbps.
Blinking green
The port is receiving or sending traffic at a rate of
10/100 Mbps.
RJ45 PoE status LED
Upper left corner of the
port
Off
PoE does not supply power.
Solid green
PoE is operational.
1.2 RG-ES126S-LP
Technical Specifications
Model
RG-ES126S-LP
Ports
Ports 1 to 24 are 10/100Base-TX auto-sensing Ethernet ports, and support PoE/PoE+.
Ports 25 and 26 are 10/100/1000Base-T auto-sensing Ethernet ports, and do not support PoE
or PoE+.
Port 26F is a 1000Base-X SFP port multiplexed with port 26 as a combo port, and the SFP port
is preferred.
Power Supply
 AC input
Rated voltage range: 100 V AC to 240 V AC
Maximum voltage range: 90 V AC to 264 V AC
Frequency: 50/60 Hz
Rated current: 4 A (max.)
EEE
Not supported
PoE
PoE/PoE+ support
Ports 1 to 24 support PoE/PoE+ with the maximum power output of 30 W per port. Ports 25 and
26 do not support PoE or PoE+.
The overall maximum output power of PoE or PoE+ is 180 W.
Power
Consumption
Less than 10 W with no PoE load
Less than 220 W with PoE full load
Operating
Temperature
0°C to 45°C (32°F to 113°F)

Ruijie Reyee RG-ES1 Series Specifications

General

Brand	Ruijie
Model	Reyee RG-ES1 Series
Category	Switch
Language	English