Ruijie Reyee RG-ES1 Series User Manual

Hardware Installation and Reference Guide Product Overview
6
Note:
1. PoE overload LED
2. System status LED
3. Port status LED
4. PoE status LED
5. Port mode switchover button
6. 10/100Base-TX auto-sensing Ethernet port
7. 10/100/1000Base-T auto-sensing Ethernet port
8. 10/100/1000Base-T combo port
9. Nameplate on the bottom of the device
Back Panel
Figure 1-6 Back Panel of the RG-ES126S-LP
Note:
1. Grounding pole
2. AC power socket
Heat Dissipation
The RG-ES126S-LP adopts fans for heat dissipation, thereby ensuring normal operation. You must reserve 10 cm distance
space at both sides and the back plane of the cabinet to allow airflow. It is recommended that you clean the RG-ES126S-
LP once every three months to avoid dust from blocking vents.
LEDs
LED
Panel Identification
State
Meaning
System status LED
PWR
Off
The switch is powered off.
Solid green
The switch is operational.
9

Ruijie Reyee RG-ES1 Series Specifications

General

Brand	Ruijie
Model	Reyee RG-ES1 Series
Category	Switch
Language	English