Ruijie RG-NBS Series User Manual

1-36
Configuration Guide
eWeb Configuration (Standalone Mode)
3.5.4 Rate Limiting
The Rate Limiting module allows you to configure a port rate limit.
Figure 3-5-5 Rate Limiting
 Batch editing the rate limit of ports/Editing the rate limit of a single port
1. Click Batch Edit. In the displayed dialog box, select ports, set the Rx speed or the Tx speed, and click OK. The message
"Edit operation succeeded." is displayed, and the port list is updated.
2. Click Edit in the Action column. In the displayed dialog box, set the Rx speed or the Tx speed, and click OK. The
message "Operation succeeded." is displayed, and the port list is updated.
 Batch deleting the rate limit of ports/Deleting the rate limit of a single port
1. Select multiple entries in Port List and click Delete Selected. In the displayed confirmation box, click OK.
2. Click Delete in the Action column. In the displayed confirmation box, click OK.
Tips:
1. You must set the Rx speed or the Tx speed.
2. When the Rx speed and the Tx speed are not set, the port rate is not limited.

Ruijie RG-NBS Series Specifications

General

Brand	Ruijie
Model	RG-NBS Series
Category	Switch
Language	English