Salus iT500 User Manual

iT500 User Reference Manual
18
Installing the iT500TR Thermostat
The iT500 Thermostat is portable and can be located anywhere, providing it is within range of the iT500RX
Receiver.
If necessary, install the batteries in the iT500 Thermostat (see Battery Replacement).
Fit the wall mounting bracket and clip the Thermostat to the wall, as follows:
1. Attach the wall mounting bracket to a suitable wall using the ttings supplied and the built in level.
Note: For best results mount the iT500 Thermostat 1.5m from ground level.
2. After rst ensuring that the bracket is secure, clip the iT500 Thermostat into place by aligning the recess
on the back of the unit to the bracket and clipping into place.
3. Once clipped into place, ensure the unit is securely seated on the bracket.

Salus iT500 Specifications

General

Frequency	868 MHz
Interface	Z-Wave
Control type	Touch
Product color	Black, Silver
Smart thermostat	Yes
Units of measurement	°C
Maximum outdoor range	30 m
Temperature range (T-T)	5 - 35 °C
Battery type	AA
Operating voltage	2 V
Number of batteries supported	2
Handheld remote control	No

Weight and Dimensions

Depth	30 mm
Width	128 mm
Height	95 mm