SaMASZ KT 301 User Manual

Operating manual
Rear disc mower with central suspension
- hydro-pneumatic or spring suspension
- 3 4 -
 depending on the tractor used the mower should be connected to the 3-point hitch so that
the distance Y, the distance between the interior cutting disc and the tires of the tractor, is
between 0 and 4" for KT 260 (H) and KT 261 (H). For KT 300 H and KT 301 (H) the
distance Y should be between 1' and 1' 3¾" and for KT 340 (H) and KT 341 (H) between 1'
8" and 2'.
Fig. 20. Side positioning of the mower against the tractor
5.8. Disconnecting mower from tractor
WARNING:
When disconnecting, make sure there is no person in between the machine
and the tractor.
To disconnect the machine from the tractor:
 Set the machine on an even, stable ground,
 Turn off the tractor's power and remove the key,
 Secure the machine against moving by placing wedges at wheels,
 Fold out the support leg and secure it with safety pin,
 Disconnect the machine's hydraulics and electrics from the tractor,
 Disconnect the PTO shaft and place it on the shaft holder, delivered as standard with the
machine,
 Detach the machine from the tractor.
Y
For KT 260 (H)
KT 261 (H)
Y = between 0 and 4"
For KT 300 (H)
KT 301 (H)
Y = between 1' and 1' 3¾"
For KT 340 (H)
KT 341 (H
Y = between 1' 8" and 2'

SaMASZ KT 301 Specifications

General

Brand	SaMASZ
Model	KT 301
Category	Lawn Mower
Language	English