Operating manual
Rear disc mower with central suspension
- hydro-pneumatic or spring suspension
- 5 0 -
9. DISASSEMBLY AND WITHDRAWAL FROM USE
9.1. Scrapping
If the mower cannot be repaired anymore, it should be withdrawn from use
.
To do so, oil from intersecting axis gear and cutterbar should be drained and delivered to a
proper waste treatment company. Clean the mower parts, dismantle and dispose properly of all
plastic parts. After that, the mower can be scrapped.
10. WARRANTY CARD
REAR DISC MOWER WITH CENTRAL SUSPENSION
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE: A warranty card without the required information or with corrected or illegible
information – is invalid.
11. WARRANTY TERMS
11.1. Warranty claims procedures
1. The manufacturer guarantees its products against faults in materials or production.
2. Warranty period is for two years from the date of sale to the purchaser, stated above.
3. Any repair which is subject to warranty should be carried out by an authorised SaMASZ
dealer. Upon completion of the repair, the dealer must submit a warranty claim within 14
days.
4. Warranty claims regarding replacing of the product are considered if received within 14
days after it is completed by the manufacturer.
5. The following parts and situations are not covered by warranty:
a) wearing parts: cutting plates, sliding skids, intersecting axis gears and parts inside the
gearboxes, bushings and sliding elements, clutches, joints, knife holder, cutting knives,
Serial number
Date of manufacture
Manufacturer’s stamp
QC signature
Date of purchase
Dealer’s stamp
Dealer’s signature
To Next Page
Loading...
Need help?
General
