Operating manual
Rear disc mower with central suspension
- hydro-pneumatic or spring suspension
- 4 7 -
Roller conditioner’s gearbox lubrication points
7.4. Bearings
Every 50 hours of the mower's operation, lubricate bearing beds of conditioner/rollers shaft
(Fig. 40 - 42). The manufacturer-recommended lubricant is ŁT43 grease or other equivalent
lubricant for rolling and sliding bearings which operate in temperature range of -30° and +130°C.
Fig. 40. Point of lubrication with ŁT43 grease for non-locating bearing – in mowers with swath rollers
A
C
B
B
C
A
Lubrication
point
Lubrication
point