Setting Up the Audio Options Setting Up the Display Options
With the unit inStop mode, press the MENU button.
Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
Select Audio Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select the desired
item.Then press the RIGHT or ENTER button.
ID Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio,
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5,1CH).
Select Bitstream when using the Digital
Audio Output,
_: Be sure to select the correct Digital Output or
no audio will be heard,
0 DTS
1. Off :Doesn't output digitaI signal
2. On :Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder,
• Dynamic Compression
1. On :Toselect dynamic compression.
2. Off :Toselect the standard range,
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button,
• Manufactured under license from Dolby Laboratories,
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories,
• °DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc,
With the unit in Stop mode, pressthe MENU button.
Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Use the UP/DOWN buttons to select the desired
item.Then pressthe RIGHT or ENTER button.
O "IV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio),
1.4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen,
Black bars will appear at the top and bottom of the screen.
2, 4:3 Pan Scan :
Select this for conventional size TVs when you want to see
the central portion of the 16:9 screen, (Extreme leftand right
side of movie picture will be cut off,)
3, 16:9 Wide :
You can view the full 16:9 picture on your widescreen TM
Still Mode
These options will help prevent picture shake in still mode and
display small text clearer.
1. Auto :When selecting Auto, Field/Frame mode will be
automatically converted.
2, Field : Select this feature when the screen shakes in the Auto
mode.
3. Frame : Select this feature when you want to see small letters
more clearly inthe Auto mode.
O Screen Messages
Use to turn on-screen messages On or Off,
O Front Display
Adjust the brightness of the unit's front panel display,
1. Auto Dim : Makes the Front Panel Display dim automatically
when playing a DVD,
2, Bright : Makes the Front Panel Display bright,
3. Dim : Makes the Front Panel Display dim.
Q Black Level
Adjusts the brightness of the screen.(On/Off)
• How to make the SETUP menu
disappear or return to menu
screen during set up;
Pressthe RETURN orLEFT button.
40 41
To Next Page
Loading...
Need help?
General
