Setting satellite system
(MENU/123) MENU Broadcasting Channel Settings Satellite System
You can configure a set of satellite dish settings before performing a channel scan.
"
This function is only available on certain models in specific geographical areas.
Changing teletext language
(MENU/123) MENU Broadcasting Channel Settings Teletext Language
You can set or change the teletext language. To watch the teletext broadcast in your preferred
language, select a language to use in Primary teletext. If this language is not supported, you can
watch the teletext broadcast in your secondary preferred language set in Secondary teletext.
"
This function is only available on certain models in specific geographical areas.
Showing common interface menu
(MENU/123) MENU Broadcasting Common Interface
You can view information about common interfaces.
●
CI Menu
Enables the user to select from the CAM-provided menu. Select the CI menu based on the menu
PC Card.
●
CAM video transcoding
Configures the setting to transcode the video codec from the CAM automatically. Turn it Off if
you do not want to use it.
"
You must use a CAM that supports video codec transcoding.
●
Application Info
Displays information about the CAM inserted into the CI slot and about the “CI or CI+ CARD”
inserted into the CAM. You can install the CAM any time, with or without the TV turned on.
●
CICAM PIN Manager
Manages Common Interface Common Access Module (CICAM) PIN. Save PIN or change stored
PIN and then set other PIN options.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
