Samsung JS8500 User Manual

152
Anynet+ (HDMI-CEC) Isn't Working
The problem Try this!
Anynet+ does not
work.
Confirm that the device is an Anynet+ device. The Anynet+ system supports
Anynet+ devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC) ((MENU/123)
MENU System Anynet+ (HDMI-
CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Plug & Play, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices
again or turn your TV off and on.
I want to start
Anynet+.
Check if the Anynet+ device is properly connected to the TV, and then select the
Anynet+ (HDMI-CEC) ((MENU/123)
MENU System Anynet+ (HDMI-CEC))
menu to see if Anynet+ (HDMI-CEC) is set to On.
I want to exit Anynet+.
Select View TV from the Anynet+ menu.
Select a non-Anynet+ device from the Source list.
The message
"Connecting to
Anynet+ device..."
or "Disconnecting
from Anynet+ device"
appears on the screen.
You cannot use the remote control when you are configuring Anynet+ or switching
to a viewing mode. Use the remote control after the TV has completed the Anynet+
configuration or has switched to a viewing mode.
The Anynet+ device
won't play.
You cannot use the play function when Setup is in progress.
The connected device
is not displayed.
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC) ((MENU/123)
MENU System Anynet+ (HDMI-
CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the
device is connected to your TV with an HDMI cable. Some HDMI cables may not
support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
The TV audio is not
being played through
the receiver.
Connect an optical cable to the TV and the receiver.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that
supports ARC.

Samsung JS8500 Specifications

General

Screen shape	Flat
Display diagonal	55 \
Native aspect ratio	16:9
LED backlighting type	Edge-LED
Motion interpolation technology	Motion Rate 240
3D	Yes
3D glasses quantity	1
Annual energy consumption	135 kWh
Tuner type	Digital
Digital signal format system	ATSC
Internet TV	-
Audio decoders	Dolby Digital, DTS, DTS Premium Sound 5.1, DTS Studio Sound, Dolby MS11
RMS rated power	20 W
Number of speakers	2
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Number of OSD languages	3
On Screen Display (OSD) languages	FRE, ENG, ESP
PC in (D-Sub)	No
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Consumer Electronics Control (CEC)	Anynet+
Cables included	AC
Package depth	157 mm
Package width	1425 mm
Package height	81 mm
Package weight	26000 g
Sustainability certificates	ENERGY STAR
AC input voltage	110 - 120 V
AC input frequency	60 Hz
Power consumption (max)	215 W
Power consumption (standby)	0.3 W
Power consumption (typical)	73 W
Product color	Silver
Panel mounting interface	400 x 400 mm

Weight and Dimensions

Depth (with stand)	231 mm
Height (with stand)	762 mm
Weight (with stand)	21300 g
Depth (without stand)	30 mm
Width (without stand)	1247 mm
Height (without stand)	714 mm
Weight (without stand)	19000 g