ENGLISH
4949
Basic Recording
✤ The Nite Pix function works in both Camera and M.Cam modes.
✤ The Nite Pix function enables you to record a subject in darkness.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE or MEMORY CARD.
(SC-D354/D355 only)
3. Slide the NITE PIX switch to ON.
■ Nite Pix indicator ( ) appears on the LCD
screen.
■ The infrared light is turned on automatically.
4. To cancel the Nite Pix function, slide the NITE PIX
switch to OFF.
[ Notes ]
■ The maximum recording distance using the infrared
light is about 3 m (about 10 feet).
■ If you use the Nite Pix function in normal recording
situations (ex. outdoors by day), the recorded picture
may be tinted green.
■ Nite Pix is not available while taking a photo image.
■ In the Nite Pix mode, certain functions are not
available, such as Exposure, White Balance,
Program AE, Digital Effect and BLC.
■ If focusing is difficult in the auto focus mode when
using the Nite Pix function, focus manually.
■ Do not cover the Infrared Light with your hand.
■ Do not set the NITE PIX to ON in bright lighting.
It might damage the CCD (Charge Coupled Device).
Nite Pix (0 lux recording) (SC-D352/D354/D355 only)
✤ Camera( ) M.Cam (0 LUX )
✤
1. CAMERA( )
2. Mode TAPE( ) MEMORY
CARD( ) (
SC-D354/D355
)
3. ON
■ ()
■
4.
,
OFF
■ 3 ( 10
)
■ (
),
■
■ , :White
Balance( ), ,
,
,
BLC
( )
■ ,
■ ,
■ , ,
CCD
(
0 LUX
) (
SC-D352/D354/D355
)
60min
Nite Pix
0:00:10
SP
STBY
1
3
œ
To Next Page
Loading...
Need help?
General