ENGLISH
Playback
6969
✤ The playback function works only in Player mode.
✤ You can monitor the playback picture on the LCD screen.
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE.
(SC-D353/D354/D355 only)
3. Insert the tape you wish to view. (see page 36)
4. Open the LCD screen.
■ Adjust the angle of the LCD screen and set the
brightness or color if necessary.
5. Press the (REW) button to rewind the tape to the
starting point.
■ To stop rewinding, press the (STOP) button.
■ The Camcorder stops automatically after
rewinding is complete.
6. Press the (PLAY/STILL) button to start
playback.
■ You can view the picture you recorded on the
LCD screen.
■ To stop the play operation, press the (STOP)
button.
✤ You can adjust the LCD Bright/Color during
playback.
✤ The adjustment method is the same procedure as
used in Camera mode. (see page 32)
[ Notes ]
■ You can also view the picture on a TV screen, after connecting the
Camcorder to a TV or VCR. (see page 71~72)
■ Various functions are available in Player mode. (see page 73)
■ For searching and viewing still images recorded onto tape.
(see page 68)
Playing Back a Tape You have recorded on the LCD Screen
Adjusting the LCD Bright/Color during Playback
✤ Player( )
✤
1. PLAYER( )
2. Mode TAPE( )
(
SC-D353/D354/D355
)
3. ( 36 )
4.
■
5. (REW( )) ,
■ , (STOP(
))
■ , ,
6. (PLAY/STILL(
/
)) ,
■
■ , (STOP( ))
✤ /
✤ ( 32 )
■ ,
( 71~72 )
■ 73
■ 68
1
3
5
To Next Page
Loading...
Need help?
General