AUDIO DUBBING (SC-D382/D385 ONLY)
This feature enables you to dub your voice through the internal microphone or other
audio equipment connected to the camcorder onto a pre-recorded camcorder tape.
The original sound on the tape will not be erased.
The Audio Dubbing function works only in Player mode.
➥
page 18
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
You can add sound to the original sound on a pre-recorded tape recorded in SP mode
with 12bit sound.
1. Set the Select switch to TAPE. (SC-D385 only)
2. Press the MODE button to set Player ( ).
3. Move the Joystick (
/
) left or right and find the time frame of the scene to be
dubbed.
4. Press the Joystick to playback, and press it again to pause the scene.
If you want to resume to playback, just press the Joystick again on playback.
5. Press the A.DUB button on the remote control.
Audio dubbing ( ) indicator is displayed.
The camcorder is ready for dubbing.
6. Press the
(PLAY) button (on the remote control) or Joystick to start dubbing.
Press the
■
(STOP) button (on the remote control) or
move the Joystick down
(
▼
)
to stop the dubbing.
You can not use the Audio Dubbing function while playing a write protected video tape.
•
•
•
•
•
•
•
•
<SC-D382/D385 only>
To Next Page
Loading...
Need help?
General