Audio effect function works only in Player mode.
➥
page 18
Audio effect provides various playback effects to audio signals stored on a tape.
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Player ( ).
3. Insert the recorded tape and press the MENU button.
4. Move the Joystick (
▲
/
▼
)
up or down to select "Tape", then press the Joystick
or move the Joystick (
) to the right.
5. Move the Joystick (
▲
/
▼
)
up or down to select "Audio Effect", then press
the Joystick.
6. Move the Joystick (
▲
/
▼
)
up or down to select the audio effect channel, then
press the Joystick.
"Off": Disables the function.
"Voice": Highlights the human voice.
"Music": Highlights the sound by enhancing the bass and treble.
"Wide": Magnifies the stereo effect by enhancing the left and right sounds.
"Echo": Gives an echo effect.
7. To exit, press the MENU button.
We recommended connecting to external stereo devices (TV, speakers) for better audio effects.
Audio effect function is not available with DV connection.
•
•
•
•
•
•
•
•
•
AUDIO EFFECT
To Next Page
Loading...
Need help?
General