4. Specify the <Normal record setup>.
•Always : Always save recorded video in the Micro SD memory card.
`
If set to Always, the activation time cannot be changed.
•Only scheduled time :
Records only on the specified time of the specified day of week.
•[Clear ( )] : Reset all settings.
5. When done, click [Apply (
)].
If you want to record in your NAS
1. Set the saving operation and basic
recording.
J
`
Auto deletion is supported only if your NAS
meets the recommended specifications.
2. Enter the information registered in your
NAS.
•IP address : Unique IP address
assigned to the NAS.
•ID : An ID registered in the NAS.
•Password : Password registered in
the NAS.
•Default folder : Designate the NAS
user folder to save data in.
3. Click the [Test] button to see if you can
successfully connect to the NAS.
J
`
If the success message is displayed, it
means that you can successfully save data in the NAS.
`
If the fail message is displayed, check the following.
-
Confirm that the IP address of the NAS is valid.
-
Confirm that the ID/password of the NAS is valid.
-
Confirm that you can access the folder designated as the default folder using the ID of the
NAS.
-
Confirm that the NAS SMB/CIFS items are unchecked.
English _111
● SETUP SCREEN
To Next Page
Loading...
Need help?
General
