Samsung SND-6084R User Manual

English _19
● OVERVIEW
AT A GLANCE (SNO-6084R)
Appearance
Item Description
a
Sunshield It protects the camera from the direct sunlight.
b
Sunshield Hold It fixes the sunshield with the camera.
c
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
c
d
e

Samsung SND-6084R Specifications

General

Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Video formats supported	H.264
Video compression formats	H.264, M-JPEG
Supported graphics resolutions	320 x 180, 640 x 360, 640 x 480 (VGA), 800 x 450, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 960, 1920 x 1080 (HD 1080)
Sensor type	CMOS
Progressive scan	Yes
Optical sensor size	1/2.8 \
White balance	ATW, AWC
Minimum illumination	0.0017 lx
Voice codecs	G.711, G.726
Signal-to-Noise Ratio (SNR)	50 dB
Focal length range	3 - 8.5 mm
Maximum aperture number	1.2
LED type	IR
Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Built-in HDD	No
Compatible memory cards	SD, SDHC, SDXC
Wi-Fi	-
Number of users	15 user(s)
Cabling technology	10/100Base-T(X)
Ethernet interface type	Gigabit Ethernet
Power source type	PoE
Form factor	Dome
Mounting type	Ceiling/Desk
Product color	White
Housing material	Polycarbonate (PC)
Number of cameras	1
Interface	RJ-45

Weight and Dimensions

Height	107.6 mm
Weight	525 g
Diameter	132.1 mm