setup screen
92_ setup screen
Camera setup
You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<Video & Audio (
)> tab.
2. Click <Camera setup>.
3.
Configure the settings as necessary of :
Image preset,
Sensor, SSDR, White
balance, Back light, Exposure, Day/
Night, Special, OSD, IR
4. When done, click [Apply ( )].
`
If a certain time (timeout: 240s) is elapsed
with
your not pressing the [Apply (
)]
button after changing the settings, your
changes will not be applied.
If you want to set an image preset
Users can set presets easily.
The selected image preset mode will operate for the active period set by you, and the value
assigned to the mode will be used for the non-active period.
1. Select a desired mode from the image
presets.
• Definition focus : This is the factory
setting for your camera. Select it
for video recording, focusing on
reproducibility.
• Motion focus : Record a moving
object clearly. If there are many
moving objects, such as on a road or
in a crowded place like a museum,
select this option.
J
`
Noise level can increase in a low illumination environment, and sensitivity can go down.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
