104
1. Double click a new icon on the desktop and the folder in the memory
will be displayed.
2. Select an image fi le and copy or move it to MAC.
First complete uploading from computer to camera and then
remove the removable disk with the Extract command.
Using the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS
supports the camera driver.
2. Check the MAC OS version during start-up. This camera is compatible
with MAC OS 10.3 or later.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the
camera to the MAC.
Setting up the USB Driver for MAC
To Next Page
Loading...
Need help?
General
