086
Settings ( )
File name
This function allows the user to select
the fi le naming format.
File name Description
Reset
After using the reset function, the next fi le name will be set
from 0001 even after formatting, deleting all or inserting a
new memory card.
Series*
New fi les are named using numbers that follow the previous
sequence, even when a new memory card is used, or after
formatting, or after deleting all pictures.
The fi rst stored folder name is 100SSCAM, and the fi rst fi le
name is SDC10001.
File names are assigned sequentially from SDC10001
SDC10002
~
SDC19999.
The folder number is assigned sequentially from 100 to 999 as
follows: 100SSCAM
101SSCAM
~
999SSCAM.
Maximum numbers of fi les in a folder are 9999.
The fi les used with the memory card conform to the DCF
(Design rule for Camera File systems) format. If you change
the image fi le name, the image may not play back.
Imprinting the recording date
There is an option to include DATE/TIME
on still images.
– Sub menus
[Off]*: The DATE & TIME will not be
imprinted on the image fi le.
[Date]: Only the DATE will be imprinted
on the image fi le.
[Date&Time]: The DATE & TIME will be imprinted on the image fi le.
The Date & Time are imprinted at the bottom right side of the still image.
The imprint function is applied only to still images.
Depending on the manufacturer and print mode, the date printed on an
image may not be printed correctly.
Back
Set
OK
Reset
Series
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
Back
Set
OK
SETTINGS
Format
Reset
Recycle Bin
File
Imprint
Power Off
Off
Date
Date&Time
To Next Page
Loading...
Need help?
General
