033
While the menu is showing, press the Down button to move from the
main menu to a sub menu, or to move down the sub menu. When
the menu is not showing, you can use the Macro( )/Down button
to take macro pictures. The distance ranges are shown below. Press
the Macro button until the desired macro mode indicator appears on
the LCD monitor.
Macro (
) / Down button
<Macro
( )
>
<Normal Focus>
<Auto Macro
( )
>
<Manual Focus ( )>
How to Set Focus Manually
If it is diffi cult to get the automatic focus
to work (for example in low light), you can
manually control the focus.
1. Press the Macro button to enable
manual focus.
- Then the control bar for manual focus
will appear.
2. Press the Left/Right button to control
the focus as you want.
Set the manual focus to expand
the center of the window to the entire window. Press the Shutter button
halfway to return to the original state.
Note that the picture may be blurred if manual focusing is not
performed properly.
Control Bar for Manual Focus
To Next Page
Loading...
Need help?
General
