054
OIS (Optical image Stabilization)
This feature allows you to minimize camera shake while taking a
picture.
-
[OIS] Sub menus: [Off], [On]
OIS function may not work suffi ciently in the following cases.
–
To take pictures of a moving subject.
– To take pictures with higher digital zoom values.
– When camera shake is beyond the camera-shake correction
range.
– When the shutter speed is slow.
– When the battery is low.
If you operate OIS function using a tripod, the image can be
blurred by the vibration of the sensor of the OIS. Turn off the OIS
function when you use a tripod.
If the camera is subjected to an impact, the LCD monitor can be
affected. To make the camera function properly again, turn it on
and off.
Voice Memo
You can add your voice-over to a stored
still image. (Max. 10 sec.)
– If the voice memo indicator is displayed
on the LCD monitor, the setting is
completed.
– Press the Shutter button and take a
picture. The picture is stored on the
memory card.
– Voice memo will be recorded for ten
seconds from the moment the picture
is stored. In the middle of the sound
recording, pressing the Shutter button
will stop the voice memo.
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
Back
Set
Off
On
OK
RECORDING
Command Lever
Flash EVC
Quality
ACB
OIS
Voice Memo
Back
Set
Off
On
OK
To Next Page
Loading...
Need help?
General
