Safety Precautions
DANGER
The IntelliCap 2000 Automatic Capacitor Control line voltage input range is
93 to 276 Vac. Failure to observe the precautions below will result in serious
personal injury or death.
Some of these precautions may differ from your company’s operating procedures
and rules. Where a discrepancy exists, follow your company’s operating procedures
and rules.
1. QUALIFIED PERSONS. Access to an IntelliCap
2000 Automatic Capacitor Control must be
restricted only to qualified persons. See the
“Qualified Persons” section on page 2.
2. SAFETY PROCEDURES. Always follow safe
operating procedures and rules.
3. PERSONAL PROTECTIVE EQUIPMENT. Always
use suitable protective equipment, such as rubber
gloves, rubber mats, hard hats, safety glasses, and
flash clothing, in accordance with safe operating
procedures and rules.
4. SAFETY LABELS. Do not remove or obscure any
of the “DANGER,” “WARNING,” “CAUTION,” or
“NOTICE” labels. Remove tags only if instructed to
do so.
5. MAINTAINING PROPER CLEARANCE. Always
maintain proper clearance from energized
components.
S&C Instruction Sheet 1024-510 5
To Next Page
Loading...
Need help?
General
