Sanyo AVC-100 User Manual

15
REMOVING THE UNIT
Release key
Face the hook inwards.
Make sure the ignition is turned off, and then disconnect the cable from the vehicle
battery’s negative (–) terminal.
1
Remove the metal strap attached the back of the unit (if attached).
2
Engage the release keys with the outer trim ring, then pull the release keys to remove
the outer trim ring.
3
Insert the release keys into the slots at the middle left and right sides of the unit until
they click, then pull the unit out of the dashboard.
4
#AVC-100(GB)P000〜043 05.6.27 1:20 PM ページ15

Sanyo AVC-100 Specifications

General

Brand	Sanyo
Model	AVC-100
Category	Car Receiver
Language	English