87
REPLACING THE FUSE
When the fuse is blown, check the power connection and replace the fuse of regulated value (10A).
If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult
your place of purchase.
CLEANING THE CONNECTORS
If the connectors between the unit and the front panel are not clean, the unit may not function properly.
For safety, turn off the ignition key first.
1
Detach the front panel (See p.31).
2
Apply a little mount of alcohol to the cotton swab, and wipe the connectors softly.
3
¡Do not apply too much force, or connectors may be damaged.
¡Do not touch the connectors directly with your fingers or with any metal device.
t CAUTION
To Next Page
Loading...
Need help?
General
