- 29 -- 28 -
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol
!
!!
in the parts list and the schematic diagram designated
components in which safety can be of special significance. When replacing a component identified by
!
!!
, use only the replacement parts designated, or parts with the
same ratings of resistance, wattage or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to determine
that exposed parts are acceptably insulated from the supply circuit before returning the product to the customer.
SCHEMATIC DIAGRAM (AMPLIFIER)
This is a basic schematic diagram.
To Next Page
Loading...
Need help?
General
