22
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 70-71.
Main Menu Sub-Menu
Image select
For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green),
Colorboard and image 1 - 4 (p.33).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard
and Image 1- 4 (p.40).
Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp., White balance (R/G/B),
Sharpness and Gamma] (pp.34-35).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.41-42).
PC adjust
Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H, Display area V and Auto PC adj. to adjust
the parameters to match with the PC input signal format (pp.30-32).
Screen
For computer source, used to adjust size of the image [Normal, True, Full, Custom and Digital zoom +/– ] (pp.35-36).
For
Video source, used to set size of image [Normal, Full, Zoom, Wide, Natural wide and Custom] (p.43).
Input
Used to select an input source from Computer 1, Computer 2, HDMI, Video or S-video (pp.27-28,37-38).
Sound
Used to adjust the volume or mute the sound (p.24).
Information
Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp
counter, Power management, Keylock, PIN code lock and Remote control (p.60).
Guide
The key operation is displayed.
Setting
Used to set the projector’s operating configurations (pp.44-59).
Network
See owner’s manual of “Network Set-up and Operation”.
Basic Operation
To Next Page
Loading...
Need help?
General