28
Choose Computer 2(RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Input Source Selection (Computer 2: RGB)
Direct Operation
Menu Operation
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.45).
COMPUTER 2 button
Top ControlRemote Control
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point buttons to select Input and
then press the Point
or the SELECT button.
Use the Point buttons to select Computer 2 and
then press the SELECT button.
Input Menu
Computer 2(RGB)
3
When Computer 2 is selected, analog RGB input
source will be selected directly.
INPUT button
Computer Input
COMPUTER 2 can not be selected when using the COMPUTER IN 2/
MONITOR OUT terminal as MONITOR OUT output.
Computer 1
HDMI
Computer 2
S-video
Video
To Next Page
Loading...
Need help?
General